大发3dLogo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>实验室常用大发3d>>注射泵> 现货,Syringe Heater Kit,HEATER-KIT-1LG

商品编号:68592
分享

现货,Syringe Heater Kit,HEATER-KIT-1LG

价    格:询价

产    地:美国更新时间:2019/7/15 13:41:34

品    牌:syringepump型    号:HEATER-KIT-1LG

状    态:正常点击量:367

18618101725
联系我时,请说明是在大发3d上看到的,谢谢!

世联博研(北京)科技有限公司

联 系 人:王荣

电     话:18618101725

传     真:010-67529703

等     级: (第 9年)

性     质:生产型,贸易型,服务型,

联系我时请说在大发3d上看到的,谢谢!




Syringe Heater Kit

Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm 

Model: HEATER-KIT-1LG

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

现货,Syringe Heater Kit,HEATER-KIT-1LG

Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.

Specification Notes:

  • Available in 2 versions:

    • 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)

    • 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)

  • Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.

  • Multiple syringe heater pads can be attached to the control unit, under restricted conditions.

  • Set point and other parameters retained in memory

  • Digitally sets the heater set point

  • Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.

  • Dual temperature sensors in primary heating pad.

  • Alarm modes with multiple layers of protection to prevent temperature overrun.

  • Additonal heat protection for the pump may be needed when heating syringes above 100°C.

  • If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.


产品参数

Syringe Heater Kit

Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm 

Model: HEATER-KIT-1LG

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.


产品介绍

Syringe Heater Kit

Heater control unit & 120Vac 33W,2 thermocouple,54cm cord,9cm x7.5cm 

1.jpg


Model: HEATER-KIT-1LG

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.

Specification Notes:

  • Available in 2 versions:

    • 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)

    • 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)

  • Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP      version.

  • Multiple syringe heater pads can be attached to the control unit, under restricted      conditions.

  • Set point and other parameters retained in memory

  • Digitally sets the heater set point

  • Controller will heat the syringe and hold the set temperature using an on/off or      Thermo-kinetic control algorithm.

  • Dual temperature sensors in primary heating pad.

  • Alarm modes with multiple layers of protection to prevent temperature overrun.

  • Additonal heat protection for the pump may be needed when heating syringes above 100°C.

  • If you are in a country where the voltage is above 120V, you must purchase a step-down      transformer (Model: PWR-220-110-E) along with the Heater Kit.

现货,Syringe Heater Kit,HEATER-KIT-1LG



猜你喜欢