大发3dLogo

热门词:生物显微镜 水质分析仪 微波消解 荧光定量PCR 电化学工作站 生物安全柜

现在位置首页>行业专用>行业专用仪器/仪表>仪器> DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS23

商品编号:74995
分享

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS23

价    格:询价

产    地:美国更新时间:2019/9/11 7:42:53

品    牌:欧米茄型    号:DP-F33-SQRT

状    态:正常点击量:23

15221105376
联系我时,请说明是在大发3d上看到的,谢谢!

上海茂培电子科技有限公司

联 系 人:范先生

电     话:15221105376

传     真:

等     级: (第 4年)

性     质:贸易型,

联系我时请说在大发3d上看到的,谢谢!




DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

显示比率、批次总数和总计


费率和总价的单独K系数


12至24伏输出


可选16点线性化


NEMA 4X(IP65)前面板盖




DP-F31速率计/积算器接受3至30 Vdc脉冲、干触点闭合、电压或毫安培输入,并为批量控制提供2级SPDT继电器输出。该显示器完全可扩展为工程单位,并可在批次总数、费率和总计之间切换。线性化选项允许用户在输入范围内选择多达16个不同的K系数,以精确指示非线性信号。



产品参数

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

规格


输入功率:110 Vac±15%或12至27 Vdc标准;220 Vac±15%可选


电流:最大250 mA dc或3.2 VA


输出功率:交流供电机组


只有+24或+12 Vdc@100 mA;未调节(±5%最坏情况)


脉冲输入:


DP-F31:0至1 Vdc(低),3至30 Vdc(高),最大20 kHz(最小开/关35_s)


DP-F32:4.7 kΩ,在输入端拉至+5 Vdc,用于与接触地或NPN集电极晶体管脉冲。


系数化输出:最小开/关:0.013 ms;开路集电极最大下沉100 mA,最大从1到30 Vdc;最大系数化计数速度为20 kHz


温度:


工作温度:0至54°C(32至130°F)


储存温度:-40至93°C(-40至200°F)


精度:±0.5%fs


继电器输出:2个SPDT触点,在120/240 Vac或28 Vdc下额定电流为10 A。


4至20 mA输出:±0.5%fs精度;需要3至24 Vdc电源电压,无感应



产品介绍

DP-F33-SQRT_DP-F33-220V-LIN_DP-F34-LIN_DP-F34-RS232控制器OMEGA

Displays Rate, Batch Total, and Grand Total

Separate K Factors for Rate and Total

12 to 24V Output

Optional 16-Point Linearization

NEMA 4X (IP65) Front-Panel Cover


The DP-F31 ratemeter/totalizer accepts 3 to 30 Vdc pulses, dry-contact closure, voltage, or milliamp inputs, and provides 2-stage SPDT relay outputs for batch control. The display is fully scalable for engineering units and may be toggled between batch total, rate, and grand total. The linearization option allows the user to select up to 16 different K factors over the input range for accurate indication of non-linear signals.


Other features include 12 to 24 Vdc output for powering up flowmeters; pulsed (0.1 to 9.9 s) or maintained outputs; input filtering for dry-contact closure (such as reed relays); local/remote reset; excitation for open-collector or mechanical contacts; user-programmable auto-reset of batch total (repeat cycles, 10 Hz max); security lockout to prevent unauthorized changes; factored pulse output; and analog output for rate or total (analog output not available with square root -SQRT option).


The DP-F30 series indicates rate to 5?-digits and total to 8-digits, with program and count data stored for up to 10 years if power is lost. 


SPECIFICATIONS

Input Power: 110 Vac ±15% or 12 to 27 Vdc std.; 220 Vac ±15% optional

Current: Max 250 mA DC or 3.2 VA

Output Power: On AC-powered units

only: +24 or +12 Vdc @ 100 mA; unregulated (±5% worst case)

Pulse Inputs:

    DP-F31: 0 to 1 Vdc (low), 3 to 30 Vdc (high), 20 kHz max (min on/off 35 ìs)

    DP-F32: 4.7 kΩ pull up to +5 Vdc on input for pulsing with contact to ground or NPN collector transistor

Factored Output: Min on/off: 0.013 ms; open collector sinks 100 mA max from 1 to 30 Vdc max; max factored count speed is 20 kHz

Temperature:

    Operating: 0 to 54°C (32 to 130°F)

    Storage: -40 to 93°C (-40 to 200°F)

Accuracy: ±0.5% FS

Relay Outputs: 2 SPDT contacts rated for 10 A at 120/240 Vac or 28 Vdc

4 to 20 mA Output: ±0.5% FS accuracy; requires 3 to 24 Vdc supply voltage, non-inductive




猜你喜欢