8:00
AM - 8:15 AM Module
0: Introduction and Opening Remarks
Presenter: Merrick "Rick" Blancq, DOE/RL DQO Coordinator
This
module briefly discusses the DOE NAMP mission to institutionalize
the DQO Process throughout the DOE complex and provides an
overview and the objectives of the workshop.
|
8:15
AM - 8:30 AM Introductions
of Class Members
The members
of the class will be asked to introduce themselves, who they
represent, and why they are attending and/or what they hope
to get out of the training.
|
8:30
AM - 8:45 AM Module
1: Agenda and Objectives
Presenter: Sebastian Tindall
This module presents the day's agenda, the objectives of each
of the 10 modules, the contents of the appendices, and the
module evaluation form.
|
|
8:45
AM - 9:45 AM Module
2: How many samples do I need?
Presenter: Sebastian Tindall
Sampling and analysis methods are used to estimate the true
condition of site. However, estimation introduces uncertainty
into the decision-making process. This uncertainty can be
managed through planning so that you can "do it and prove
it" efficiently and effectively.
|
|
9:45
AM - 10:00 AM Morning
Break
|
10:00
AM - 11:00 AM Module
3: Key Concepts Underlying DQOs and VSP
Presenter: Jim Davidson
Using innovative, interactive demonstrations, the class will
become familiar with the important and often critical environmental
sampling statistical concepts in order to develop defensible
sampling designs.
|
|
|
11:00
AM - 12:00 PM Module
4: The EPA 7-Step DQO Process (Steps 1 - 3)
Presenter: Sebastian Tindall
This module presents the EPA 7-Step DQO Process in detail.
Each step is discussed in terms of the information that is
needed to begin the step, the actions that need to be performed,
and the information that is needed to conclude a given step
and begin the next step. Steps 1 - 3 are covered in this first
session.
|
| |
12:00
PM - 1:00 PM Lunch Break
|
1:00
PM - 1:45 PM Module 5: The EPA
7-Step DQO Process (Steps 4 - 5)
Presenter: Sebastian Tindall
The presentation of the EPA 7-Step DQO Process, in detail,
is continued. Each step is discussed in terms of the information
that is needed to begin the step, the actions that need to
be performed, and the information that is needed to conclude
a given step and begin the next step. Steps 4 - 5 are covered
in this second session.
|
|
|
1:45
PM - 2:45 PM Module
6: Visual Sample Plan Demonstration
Presenter: Jim Davidson
The development of a sample plan involves evaluating trade-offs
between decision error, sampling costs, and remediation costs.
Visual Sample Plan software provides a quick and easy way
to visualize the impacts of various sample designs.
|
2:45
PM - 3:00 PM
Afternoon Break
|
|
3:00
PM - 3:45 PM Module
7:The 7-Step DQO Process (Steps 6 - 7)
Presenter: Jim Davidson
The presentation of the EPA 7-Step DQO Process, in detail,
is continued. Each step is discussed in terms of the information
that is needed to begin the step, the actions that need to
be performed, and the information that is needed to conclude
a given step and begin the next step. Steps 6 - 7 are covered
in this third session.
|
3:45
PM - 4:00 PM Module
8: ERC DQO Web Page
Presenter: Sebastian Tindall
This module takes the class on a tour of the ERC DQO Web Page,
displaying and demonstrating the many DQO materials and tools
developed to support the DQO Process, including the DQO Electronic
Template.
|
|
|
|
4:00
PM - 4:45 PM Module
9: The ERC DQO Implementation Process Flow and Wall
Charts
Presenter: Sebastian Tindall
The work process flow diagram for implementing the ERC DQO
process is discussed. Pivotal elements of this process are
getting the key decision-makers involved both early and often,
and keeping meetings to a minimum.
|
|
4:45
PM - 5:00 PM Module 10: Closing
Remarks
Presenter: Merrick "Rick" Blancq, DOE/RL DQO Coordinator
Key points
to remember are summarized in this module. They all highlight
how the DQO process helps you make order out of the chaos
of regulations, standards, and requirements that surround
collecting and analyzing environmental data.
|
